E-flite Power 46 Brushless Outrunner Motor, 670Kv Instrukcja Użytkownika Pobierz pdf

Power 46 Brushless Outrunner Instructions

Thank you for purchasing the E-flite Power 46 Brushless Outrunner motor. The Power 46 is designed to deliver clean and quiet power

for .40 to 46-size sport and scale airplanes, 25- to 40-size 3D airplanes, or models requiring up to 800 watts of power. It’s an especially

good match for Hangar 9® .40-size trainers like the Alpha .40 (HAN2450), Arrow .40 (HAN2625) and warbirds like the T-34 Mentor 40

(HAN2425). Also a great match for sport planes like the Ultra Stick 40 (HAN1675 or HAN1690), Seagull Spacewalker 40 (SEA2050),

and smaller sport 3D planes like the Twist 40 (HAN2650).

Power 46 Brushless Outrunner Features:

• Equivalent to a 40- to 46-size glow engine for 4- to 7-pound (1.8 - 3.2-Kg) airplanes

• Ideal for 25- to 40-size 3D airplanes up to 5-pounds (2.2 Kg)

• Ideal for models requiring up to 800 watts of power

• High torque, direct drive alternative to inrunner brushless motors

• Includes mount, prop adapters, and mounting hardware

• Quiet, lightweight operation

• External rotor design, 6mm shaft can easily be reversed for alternative motor installations

• High quality construction with ball bearings and hardened steel shaft

• Slotted 12-pole outrunner design

Power 46 Specifications

Diameter: 50mm (2 in)

Case Length: 55mm (2.15 in)

Weight: 290g (10 oz)

Shaft Diameter: 6mm (.24 in)

EFLM4046A

Kv: 670 (rpms per volt)

Io: 3.88A @ 10V (no load current)

Ri: .04 ohms (resistance)

Continuous Current: 40A*

Max Burst Current: 55A*

Watts: up to 800

Cells: 12-16 Ni-MH/Ni-Cd or 4-5S Li-Po

Recommended Props: 12x8 to 14x10

Brushless ESC: 60-Amp

* Maximum Operating Temperature: 220 degrees Fahrenheit

* Adequate cooling is required for all motor operation at maximum current levels.

* Maximum Burst Current duration is 30 seconds. Adequate time between maximum burst intervals is required.

Note: The 3.5mm Gold Bullet Connectors included on this motor are rated for current up to 60A. Please see our accessory parts listed

below for 4mm connector option if you are running more current than we recommend.

Determine a Model’s Power Requirements:

1. Power can be measured in watts. For example: 1 horsepower = 746 watts

2. You determine watts by multiplying ‘volts’ times ‘amps’. Example: 10 volts x 10 amps = 100 watts

Volts x Amps = Watts

3. You can determine the power requirements of a model based on the ‘Input Watts Per Pound’ guidelines found below, using the flying

weight of the model (with battery):

• 50-70 watts per pound; Minimum level of power for decent performance, good for lightly loaded slow flyer and park flyer

models

• 70-90 watts per pound; Trainer and slow flying scale models

• 90-110 watts per pound; Sport aerobatic and fast flying scale models

• 110-130 watts per pound; Advanced aerobatic and high-speed models

• 130-150 watts per pound; Lightly loaded 3D models and ducted fans

• 150-200+ watts per pound; Unlimited performance 3D models

NOTE: These guidelines were developed based upon the typical parameters of our E-flite motors. These guidelines may vary

depending on other motors and factors such as efficiency and prop size.

1 2 3 4

Podsumowanie treści

Strona 1

Power 46 Brushless Outrunner Instructions Thank you for purchasing the E-flite Power 46 Brushless Outrunner motor. The Power 46 is designed to deli

Strona 2

4. Determine the Input Watts per Pound required to achieve the desired level of performance: Model: Hangar 9 Ultra Stick 40 ARF Estimated Flying We

Strona 3

Option 2: Motor: Power 46 ESC: Castle Creations Phoenix 60 (Standard settings with 12V Soft Li-Po cut off and no brake) Prop: APC 13x8E Battery: T

Strona 4

Installation: NOTE: Photo shows typical installation of motor and x-mount directly to the outside of the firewall. There are other options availa

Komentarze do niniejszej Instrukcji

Brak uwag

E-flite Power 46 Brushless Outrunner Motor, 670Kv Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt komputerowy E-flite Power 46 Brushless Outrunner Motor, 670Kv. E-flite Power 46 Brushless Outrunner Motor, 670Kv User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy E-flite Power 46 Brushless Outrunner Motor, 670Kv